Product Description

Vc3061 electronic tube series cermet structure, thorium carbide
Tungsten cathode, forced air-cooled triode, with a maximum operating frequency of 50MHz,
Maximum plate consumption 1500w Mainly used in industrial high-frequency heating equipment as
The oscillator can be interchanged with 6T51 electronic tube produced by Toshiba Corporation of Japan.

Specifications︰ Characteristic parameters
Filament voltage 6.3±5%V Filament current 32.5A
Amplification factor (ia=0.2a) forty-eight Transconductance (ia=0.2a) 6.7mA/V
Interelectrode capacitance Grid anode 8.8pF
Grid cathode 11.5pF
Anode cathode 1.9pF
Maximum operating frequency 50MHz Maximum height 170mm
Maximum diameter 100mm Maximum weight 1.0kg
Installation method Vertical / anode up or down Cooling mode Forced air cooling
Minimum air volume 2m3/min Minimum static pressure 98Pa
Maximum temperature of anode outer surface and sealing joint 250℃

Advantages︰ Limit application data
High frequency power amplifier and oscillator - class C telegram

Continuous use
Intermittent use
Anode DC voltage (kV)
seven point five
seven point five
Anode DC current (a)
zero point seven five
one
Grid DC current (MA)
two hundred
three hundred
Anode dissipation (W)
eight hundred
one thousand and five hundred
Grid dissipation (W)
fifty
seventy
Typical operating state (oscillator)

Continuous use
Intermittent use
Anode DC voltage (kV)
six
six
Anode DC current (a)
zero point six
zero point nine five
Grid DC current (MA)
one hundred and fifty
one hundred and eighty
Grid resistance (Ω)
three thousand
three thousand
Anode output power (W)
two thousand and five hundred
four thousand
Note: intermittent use means that each working time is 5 seconds, and the working ratio is 50%

Product Image